Biomechanical Assessment of Load Applied on Residuum of Individuals With Limb Loss Fitted With a Prosthetic Limb

This study will aim at performing biomechanical analyses of the actual load applied on the end of the stump (residuum) of individuals with transfemoral limb loss fitted with bionics bone-anchored prostheses during activities of daily living. The assessment of the inner prosthetic loading will rely on the analyses of common activities of daily living (e.g., walking in straight line and around circles, ascending and descending stairs and slopes, cycling, etc.) performed in experimental and/or clinical and/or open environments. The biomechanical analyses of the load will address the following research questions: A. What is the actual magnitude of the forces and moments applied on transfemoral osseointegrated implant by Rheo Knee and Power Knee during activities of daily living? living? B. What are the determinants of the loading profile in relation to the demographic and anthropometric characteristics, the type and level of activities as well as type, fitting and alignment of Rheo Knee and Power Knee? C. How the loading profiles applied by Rheo Knee and Power Knee compared to usual MPKs and Non-MPK considered below standard of care? Biomechanical data will be collected through a typical cross-sectional cohort study. Each participant will be assessed with a given prosthesis at one particular time (i.e., exposure and outcomes will be both measured at the same time). These biomechanical analyses will rely on already published protocols (e.g., study design, instrumentation setup, extraction of loading profile). Protocols to record load data have been well described by PI-Frossard in over 20 peer-review publications in top-ranked journals. The protocol used in this study has been acknowledged, validated and are commonly used within the fields of biomechanics and prosthetics. The outcome of this study will increase the basic understanding about the effects of loading on the interaction between body and prosthesis (e.g., osseointegration between residual bone and implant)