NIST SP 800-140Cr2: Cryptographic Module Validation Program (CMVP)-Approved Security Functions: CMVP Validation Authority Updates to ISO/IEC 24759

NIST Special Publication NIST SP 800-140Cr2

Cryptographic Module Validation Program (CMVP)-Approved Security Functions: CMVP Validation Authority Updates to ISO/IEC 24759

Alexander Calis This publication is available free of charge from: https://doi.org/10.6028/NIST.SP.800-140Cr2

NIST Special Publication NIST SP 800-140Cr2

Cryptographic Module Validation Program (CMVP)-Approved Security Functions: CMVP Validation Authority Updates to ISO/IEC 24759 Alexander Calis

Computer Security Division Information Technology Laboratory This publication is available free of charge from: https://doi.org/10.6028/NIST.SP.800-140Cr2 July 2023

U.S. Department of Commerce Gina M. Raimondo, Secretary National Institute of Standards and Technology Laurie E. Locascio, NIST Director and Under Secretary of Commerce for Standards and Technology

NIST SP 800-140Cr2 July 2023

CMVP-Approved Security Functions

Certain commercial equipment, instruments, software, or materials, commercial or non-commercial, are identified in this paper in order to specify the experimental procedure adequately. Such identification does not imply recommendation or endorsement of any product or service by NIST, nor does it imply that the materials or equipment identified are necessarily the best available for the purpose. There may be references in this publication to other publications currently under development by NIST in accordance with its assigned statutory responsibilities. The information in this publication, including concepts and methodologies, may be used by federal agencies even before the completion of such companion publications. Thus, until each publication is completed, current requirements, guidelines, and procedures, where they exist, remain operative. For planning and transition purposes, federal agencies may wish to closely follow the development of these new publications by NIST. Organizations are encouraged to review all draft publications during public comment periods and provide feedback to NIST. Many NIST cybersecurity publications, other than the ones noted above, are available at https://csrc.nist.gov/publications. Authority This publication has been developed by NIST in accordance with its statutory responsibilities under the Federal Information Security Modernization Act (FISMA) of 2014, 44 U.S.C. § 3551 et seq., Public Law (P.L.) 113-283. NIST is responsible for developing information security standards and guidelines, including minimum requirements for federal information systems, but such standards and guidelines shall not apply to national security systems without the express approval of appropriate federal officials exercising policy authority over such systems. This guideline is consistent with the requirements of the Office of Management and Budget (OMB) Circular A-130. Nothing in this publication should be taken to contradict the standards and guidelines made mandatory and binding on federal agencies by the Secretary of Commerce under statutory authority. Nor should these guidelines be interpreted as altering or superseding the existing authorities of the Secretary of Commerce, Director of the OMB, or any other federal official. This publication may be used by nongovernmental organizations on a voluntary basis and is not subject to copyright in the United States. Attribution would, however, be appreciated by NIST. NIST Technical Series Policies Copyright, Use, and Licensing Statements NIST Technical Series Publication Identifier Syntax Publication History Approved by the NIST Editorial Review Board on 2023-03-30 Supersedes NIST Special Publication (SP) 800-140Cr1 (May 2022) https://doi.org/10.6028/NIST.SP.800-140Cr1 How to Cite this NIST Technical Series Publication: Calis A (2023) Cryptographic Module Validation Program (CMVP)-Approved Security Functions: CMVP Validation Authority Updates to ISO/IEC 24759. (National Institute of Standards and Technology, Gaithersburg, MD), NIST Special Publication (SP) NIST SP 800-140Cr2. https://doi.org/10.6028/NIST.SP.800-140Cr2 Author ORCID iDs Alexander Calis: 0000-0003-1937-8129

NIST SP 800-140Cr2 July 2023

CMVP-Approved Security Functions

Contact Information sp800-140-comments@nist.gov National Institute of Standards and Technology Attn: Computer Security Division, Information Technology Laboratory 100 Bureau Drive (Mail Stop 8930) Gaithersburg, MD 20899-8930 All comments are subject to release under the Freedom of Information Act (FOIA).

NIST SP 800-140Cr2 July 2023

CMVP-Approved Security Functions

Abstract The approved security functions listed in this publication replace the ones listed in International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 19790 Annex C and ISO/IEC 24759 6.15, within the context of the Cryptographic Module Validation Program (CMVP). As a validation authority, the CMVP may supersede Annex C in its entirety. This document also supersedes SP 800-140Cr1. Keywords Cryptographic Module Validation Program; CMVP; FIPS 140 testing; FIPS 140; ISO/IEC 19790; ISO/IEC 24759; testing requirement; vendor evidence; vendor documentation; security policy. Reports on Computer Systems Technology The Information Technology Laboratory (ITL) at the National Institute of Standards and Technology (NIST) promotes the U.S. economy and public welfare by providing technical leadership for the Nation’s measurement and standards infrastructure. ITL develops tests, test methods, reference data, proof of concept implementations, and technical analyses to advance the development and productive use of information technology. ITL’s responsibilities include the development of management, administrative, technical, and physical standards and guidelines for the cost-effective security and privacy of other than national security-related information in federal information systems. The Special Publication 800-series reports on ITL’s research, guidelines, and outreach efforts in information system security, and its collaborative activities with industry, government, and academic organizations. Supplemental Content See https://csrc.nist.gov/projects/cmvp/sp800-140-series-info for details about the NIST Special Publication (SP) 800-140x series publications and their relationships to ISO/IEC 19790 and ISO/IEC 24759. Audience This document is intended for use by vendors, testing labs, and the CMVP.

i

NIST SP 800-140Cr2 July 2023

CMVP-Approved Security Functions

Table of Contents Scope ................................................................................................................................ 1 Normative references ....................................................................................................... 1 Terms and definitions ...................................................................................................... 1 Symbols and abbreviated terms...................................................................................... 1 Document organization.................................................................................................... 1 General....................................................................................................................... 1 Modification ................................................................................................................ 2 CMVP-approved security function requirements ........................................................... 2 Purpose ...................................................................................................................... 2 Approved security functions ........................................................................................ 2 Appendix A.

Document Revisions ....................................................................................... 3

ii

NIST SP 800-140Cr2 July 2023

CMVP-Approved Security Functions

Scope This document specifies the Cryptographic Module Validation Program (CMVP)-approved security functions and supersedes those specified in International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 19790 Annex C and ISO/IEC 24759 paragraph 6.15. This document also supersedes SP 800-140Cr1. Normative references This section identifies the normative references cited as ISO/IEC 19790 and ISO/IEC 24759. The specific editions to be used are ISO/IEC 19790:2012 and ISO/IEC 24759:2017. Please note that the version 19790:2012 referenced here includes the corrections made in 2015. National Institute of Standards and Technology (2019) Security Requirements for Cryptographic Modules. (U.S. Department of Commerce, Washington, DC), Federal Information Processing Standards Publication (FIPS) 140-3. https://doi.org/10.6028/NIST.FIPS.140-3 Terms and definitions The following terms and definitions supersede or are in addition to ISO/IEC 19790. None at this time Symbols and abbreviated terms The following symbols and abbreviated terms supersede or are in addition to ISO/IEC 19790 and ISO/IEC 24759 throughout this document: CMVP Cryptographic Module Validation Program FIPS Federal Information Processing Standard ISO/IEC International Organization for Standardization/International Electrotechnical Commission

Document organization General Section 6 of this document replaces the approved security functions of ISO/IEC 19790 Annex C and ISO/IEC 24759 paragraph 6.15. This document also supersedes SP 800-140Cr1.

1

NIST SP 800-140Cr2 July 2023

CMVP-Approved Security Functions

Modification This publication is a complete replacement of the approved security functions of ISO/IEC 19790 Annex C and ISO/IEC 24759 paragraph 6.15. There are no other modifications, additions, or deletions. CMVP-approved security function requirements Purpose This document identifies CMVP-approved security functions. It precludes the use of all other security functions. Approved security functions For the current list of CMVP-approved security functions, see https://csrc.nist.gov/projects/cmvp/sp800-140c.

2

NIST SP 800-140Cr2 July 2023

CMVP-Approved Security Functions

Appendix A. Document Revisions Edition

Date

Change

Revision 1 (r1)

May 2022

6.2 Approved security functions Added/Modified: Security function subsection headers. Added: SP 800-90A and SP 800-90B 6.2.1 Transitions Removed: SP 800-131Ar2 section references 6.2.3 Digital Signature Added: SP 800-208, October 2020 6.2.9 Other Security Functions Added: SP 800-140Dr1, May 2022

Revision 2 (r2)

July 2023

6.2 Approved security functions Removed: All subsections. Added: Reference to a CMVP web link that includes the CMVP-approved security functions. Future modifications to the list will be made on that website, minimizing the need to revise this publication.

3

Related documents

• NIST SP 800-140Dr2: Cryptographic Module Validation Program (CMVP)-Approved Sensitive Security Parameter Generation and Establishment Methods: CMVP Validation Authority Updates to ISO/IEC 24759#2892
• NIST SP 800-140Br1: Cryptographic Module Validation Program (CMVP) Security Policy Requirements: CMVP Validation Authority Updates to ISO/IEC 24759 and ISO/IEC 19790 Annex B#2890
• NIST SP 800-140E: CMVP Approved Authentication Mechanisms: CMVP Validation Authority Requirements for ISO/IEC 19790 Annex E and ISO/IEC 24579 Section 6.17#2893
• CVE-2026-13707 — NONE 0#335175
• CVE-2026-53210#315917