NIST SP 800-140Fr1 ipd: CMVP Approved Non-Invasive Attack Mitigation Test Metrics: CMVP Validation Authority Updates to ISO/IEC 24759

1 2

Draft NIST Special Publication 800-140F Revision 1

4

CMVP Approved Non-Invasive Attack Mitigation Test Metrics:

5

CMVP Validation Authority Updates to ISO/IEC 24759

3

6 7 8

Kim Schaffer

9 10 11 12 13 14 15 16 17 18 19 20 21

This publication is available free of charge from: https://doi.org/10.6028/NIST.SP.800-140Fr1-draft

22 23

Draft NIST Special Publication 800-140F Revision 1

25

CMVP Approved Non-Invasive Attack Mitigation Test Metrics:

26

CMVP Validation Authority Updates to ISO/IEC 24759

24

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

44 45 46 47 48 49 50 51 52

Kim Schaffer

Computer Security Division Information Technology Laboratory

This publication is available free of charge from: https://doi.org/10.6028/NIST.SP.800-140Fr1-draft August 2021

U.S. Department of Commerce

Gina M. Raimondo, Secretary

National Institute of Standards and Technology James K. Olthoff, Performing the Non-Exclusive Functions and Duties of the Under Secretary of Commerce for Standards and Technology & Director, National Institute of Standards and Technology

NIST SP 800-140F REV. 1 (DRAFT)

CMVP APPROVED NON-INVASIVE ATTACK MITIGATION TEST METRICS

53

Authority

54 55 56 57 58 59 60

This publication has been developed by NIST in accordance with its statutory responsibilities under the Federal Information Security Modernization Act (FISMA) of 2014, 44 U.S.C. § 3551 et seq., Public Law (P.L.) 113-283. NIST is responsible for developing information security standards and guidelines, including minimum requirements for federal information systems, but such standards and guidelines shall not apply to national security systems without the express approval of appropriate federal officials exercising policy authority over such systems. This guideline is consistent with the requirements of the Office of Management and Budget (OMB) Circular A-130.

61 62 63 64 65 66

Nothing in this publication should be taken to contradict the standards and guidelines made mandatory and binding on federal agencies by the Secretary of Commerce under statutory authority. Nor should these guidelines be interpreted as altering or superseding the existing authorities of the Secretary of Commerce, Director of the OMB, or any other federal official. This publication may be used by nongovernmental organizations on a voluntary basis and is not subject to copyright in the United States. Attribution would, however, be appreciated by NIST.

67 68 69

National Institute of Standards and Technology Special Publication 800-140F Revision 1

70 71

This publication is available free of charge from: https://doi.org/10.6028/NIST.SP.800-140Fr1-draft

72 73 74 75 76 77 78 79 80 81 82 83 84

Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately. Such identification is not intended to imply recommendation or endorsement by NIST, nor is it intended to imply that the entities, materials, or equipment are necessarily the best available for the purpose.

85 86 87 88 89

Public comment period: August 20, 2021 – September 20, 2021

90

All comments are subject to release under the Freedom of Information Act (FOIA).

Natl. Inst. Stand. Technol. Spec. Publ. 800-140F Rev. 1, 8 pages (August 2021) CODEN: NSPUE2

There may be references in this publication to other publications currently under development by NIST in accordance with its assigned statutory responsibilities. The information in this publication, including concepts and methodologies, may be used by federal agencies even before the completion of such companion publications. Thus, until each publication is completed, current requirements, guidelines, and procedures, where they exist, remain operative. For planning and transition purposes, federal agencies may wish to closely follow the development of these new publications by NIST. Organizations are encouraged to review all draft publications during public comment periods and provide feedback to NIST. Many NIST cybersecurity publications, other than the ones noted above, are available at https://csrc.nist.gov/publications.

National Institute of Standards and Technology Attn: Computer Security Division, Information Technology Laboratory 100 Bureau Drive (Mail Stop 8930) Gaithersburg, MD 20899-8930 Email: sp800-140-comments@nist.gov

i

NIST SP 800-140F REV. 1 (DRAFT)

CMVP APPROVED NON-INVASIVE ATTACK MITIGATION TEST METRICS

91

Reports on Computer Systems Technology

92 93 94 95 96 97 98 99 100 101

The Information Technology Laboratory (ITL) at the National Institute of Standards and Technology (NIST) promotes the U.S. economy and public welfare by providing technical leadership for the Nation’s measurement and standards infrastructure. ITL develops tests, test methods, reference data, proof of concept implementations, and technical analyses to advance the development and productive use of information technology. ITL’s responsibilities include the development of management, administrative, technical, and physical standards and guidelines for the cost-effective security and privacy of other than national security-related information in federal information systems. The Special Publication 800-series reports on ITL’s research, guidelines, and outreach efforts in information system security, and its collaborative activities with industry, government, and academic organizations.

102

Abstract

103 104 105 106

NIST Special Publication (SP) 800-140F replaces the approved non-invasive attack mitigation test metric requirements of ISO/IEC 19790 Annex F. As a validation authority, the Cryptographic Module Validation Program (CMVP) may supersede this Annex in its entirety. This document supersedes ISO/IEC 19790 Annex F and ISO/IEC 24759 paragraph 6.18.

107

Keywords

108 109 110

attack mitigation; Cryptographic Module Validation Program; CMVP; FIPS 140 testing; FIPS 140; ISO/IEC 19790; ISO/IEC 24759; non-invasive; testing requirement; vendor evidence; vendor documentation.

111

Audience

112 113

This document is focused toward the vendors, testing labs, and CMVP for the purpose of addressing issues in cryptographic module testing.

ii

NIST SP 800-140F REV. 1 (DRAFT)

114 115 116

CMVP APPROVED NON-INVASIVE ATTACK MITIGATION TEST METRICS

Table of Contents

117

1

Scope ................................................................................................................... 1

118

2

Normative references ......................................................................................... 1

119

3

Terms and definitions ........................................................................................ 1

120

4

Symbols and abbreviated terms ....................................................................... 1

121

5

Document organization ...................................................................................... 2

122

5.1 General ........................................................................................................................... 2

123

5.2 Modifications ................................................................................................................... 2

124

6

CMVP-approved non-invasive attack mitigation test metric requirements ... 2

125

6.1 Purpose .......................................................................................................................... 2

126

6.2 Approved non-invasive attack mitigation test metrics ..................................................... 2

127

Document Revisions ..................................................................................................... 3

128

iii

NIST SP 800-140F REV. 1 (DRAFT)

CMVP APPROVED NON-INVASIVE ATTACK MITIGATION TEST METRICS

129

1

Scope

130 131 132 133 134 135

This document specifies the Cryptographic Module Validation Program (CMVP) modifications of the methods to be used by a Cryptographic and Security Testing Laboratory (CSTL) to demonstrate conformance. This document also specifies the modification of methods for evidence that a vendor or testing laboratory provides to demonstrate conformity. Unless otherwise specified in this document, the test requirements are specified in ISO/IEC 24759 paragraph 6.18.

136

2

137 138 139

This section identifies the normative references cited as ISO/IEC 19790 and ISO/IEC 24759. The specific editions to be used are ISO/IEC 19790:2012 and ISO/IEC 24759:2017. Please note that the version 19790:2012 referenced here includes the corrections made in 2015.

140 141 142 143

National Institute of Standards and Technology (2019) Security Requirements for Cryptographic Modules. (U.S. Department of Commerce, Washington, DC), Federal Information Processing Standards Publication (FIPS) 140-3. https://doi.org/10.6028/NIST.FIPS.140-3

Normative references

144

3

145 146

The following terms and definitions supersede or are in addition to ISO/IEC 19790 and ISO/IEC 24759.

147

Terms and definitions

No additional terms at this time.

148

4

Symbols and abbreviated terms

149 150

The following symbols and abbreviated terms supersede or are in addition to ISO/IEC 19790 and ISO/IEC 24759 throughout this document:

151

CCCS

Canadian Centre for Cyber Security

152

CMVP

Cryptographic Module Validation Program

153

CSD

Computer Security Division

154

CSTL

Cryptographic and Security Testing Laboratory

155

FIPS

Federal Information Processing Standard

156

FISMA

Federal Information Security Management/Modernization Act

157

NIST

National Institute of Standards and Technology 1

NIST SP 800-140F REV. 1 (DRAFT)

158

SP 800-XXX

CMVP APPROVED NON-INVASIVE ATTACK MITIGATION TEST METRICS

NIST Special Publication 800 series document

159

5

Document organization

160

5.1

General

161 162

Section 6 of this document replaces the approved non-invasive attack mitigation test metrics requirements of ISO/IEC 19790 Annex F and ISO/IEC 24759 paragraph 6.18.

163

5.2

164 165 166 167 168

Modifications will follow a similar format as in ISO/IEC 24759. For additions to test requirements, new Test Evidence (TEs) or Vendor Evidence (VEs) will be listed by increasing the “sequence_number.” Modifications can include a combination of additions using underline and deletions using strikethrough. If no changes are required, the paragraph will indicate “No change.”

169

6

CMVP-approved non-invasive attack mitigation test metric requirements

170

6.1

Purpose

171

This document identifies CMVP-approved non-invasive attack mitigation test metrics.

172

6.2

Modifications

Approved non-invasive attack mitigation test metrics

173 174 175

1. International Organization for Standardization/International Electrotechnical Commission. ISO/IEC 17825 – Information technology – Security techniques – Testing methods for the mitigation of non-invasive attack classes against cryptographic modules

176 177 178 179

2. International Organization for Standardization/International Electrotechnical Commission. ISO/IEC 20085-1 – IT Security techniques – Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules — Part 1: Test tools and techniques

180 181 182 183

3. International Organization for Standardization/International Electrotechnical Commission. ISO/IEC 20085-2 – IT Security techniques – Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules — Part 2: Test calibration methods and apparatus

2

NIST SP 800-140F REV. 1 (DRAFT)

184

CMVP APPROVED NON-INVASIVE ATTACK MITIGATION TEST METRICS

Document Revisions Edition

Date

Change

Revision 1

[date]

§ 6.2 Approved non-invasive attack mitigation test metrics Added: ISO/IEC 17825 and associated ISO/IEC 20085-1 and -2

185

3

Related documents

• NIST SP 800-140F: CMVP Approved Non-Invasive Attack Mitigation Test Metrics: CMVP Validation Authority Updates to ISO/IEC 24759#2894
• NIST SP 800-140A: CMVP Documentation Requirements: CMVP Validation Authority Updates to ISO/IEC 24759#2889
• CVE-2026-13853 — CRITICAL 9.6#331169
• CVE-2026-60221 — CRITICAL 9.8#389126
• CVE-2026-60251 — CRITICAL 9.8#389147