PART 1511—REQUIREMENTS FOR PACIFIERS Authority: Secs. 2(f)(1)(D), (q)(1)(A), (s), 3(e)(1), 74 Stat. 372, 374, 375, as amended 80 Stat. 1304-05, 83 Stat. 187-89; 15 U.S.C. 1261, 1262. Source: 42 FR 33279, June 30, 1977, unless otherwise noted. § 1511.1 Scope of part 1511. This part 1511 sets forth the requirements whereby pacifiers (as defined in § 1511.2(a)) are not banned articles under § 1500.18(a)(8) of this chapter. § 1511.2 Definitions. (a) A pacifier (b) Guard or shield (c) Handle or ring § 1511.3 Guard or shield requirements. (a) Performance requirements. (b) Ventilation holes. § 1511.4 Protrusions. (a) Protrusions limitation. (b) Protrusion test. § 1511.5 Structural integrity tests. (a) Nipple. (b) Handle or ring. (c) Heat cycle deterioration. (d) Small parts. § 1511.6 Ribbons, strings, cords, or other attachments. A pacifier shall not be sold or distributed with any ribbon, string, cord, chain, twine, leather, yarn or similar attachments. § 1511.7 Labeling. (a) As required by paragraphs (b) and (c) of this section, pacifiers shall be labeled with the statement: “Warning—Do Not Tie Pacifier Around Child's Neck as it Presents a Strangulation Danger.” (b) The labeling statement required by paragraph (a) of this section shall appear legibly and conspicuously on any retail display carton containing two or more pacifiers. (c) Each individually packaged pacifier shall bear the labeling statement required in paragraph (a) of this section on the package legibly and conspicuously. § 1511.8 Metric references. For purposes of compliance with the test procedure prescribed by this § 500.46, the English figures shall be used. The metric approximations are provided in parentheses for convenience and information only. Figure 1 to Part 1511—Pacifier Test Fixture Figure 2 to Part 1511—Small Parts Gage