Reflections on the Reversibility of Nuclear Energy Technologies

The development of nuclear energy technologies in the second half of the 20th century came with great hopes of rebuilding nations recovering from the devasta-tion of the Second World War or recently released from colonial rule. In coun-tries like France, India, the USA, Canada, Russia, and the United Kingdom, nuclear energy became the symbol of development towards a modern and technologically advanced future. However, after more than six decades of experi-ence with nuclear energy production, and in the aftermath of the Fukushima nuclear disaster, it is safe to say that nuclear energy production is not without its problems.Some of these problems have their origins in the very materiality of the technolo-gies involved. For example, not only does the use of highly radioactive materials give rise to risks for the current generation (e.g., in the potential for disaster when reactors melt down) but high-level radioactive waste from nuclear energy production presents a serious intergenerational problem for which an acceptable final solution or its implementation remains elusive. Moreover, nuclear energy technologies have specific social and political consequences. For example, they have been said to be authoritarian technologies (Winner, 1980), requiring cen-tralized authority, secrecy, and technocratic decision-making. While some of these problems could have been foreseen before nuclear energy technologies were introduced, others only arose after these technologies were already integrated into the social and infrastructural fabric of our lives. Addition-ally, new technologies (e.g., Generation III, III+ and IV reactors) are still being developed, bringing with them new and uncertain hazards and risks. Ignorance and uncertainty about the possible deleterious effects of introducing a new technology are inevitable, especially if the technology is complex, large time-scales are involved, or risks depend on social or political factors unforeseen in the design stage. However, this should not deter us from developing and intro-ducing new technologies. Rather, it should motivate us to organize these ‘exper-iments’ with new technologies in society in such a way that we can learn about their possible hazards and risks as effectively and responsibly as possible (van de Poel, 2011, 2015). In this way, it is possible to minimize risks and avoid unwant-ed moral, social or political developments. However, organizing such experi-ments responsibly also means that one could come to the conclusion that continuing an experiment is no longer responsible or desirable. Should we be prepared for such a scenario, and if so, how could we do that? One possible strategy to tackle this issue is that the technology and its introduction should be reversible. The aim of this thesis is to further explore this strategy by answering the following main research question (RQ) and accompanying subquestions (SQ):RQ: What are the implications of reversibility for the responsible develop-ment and implementation of nuclear energy technologies?SQ1: Under what conditions can nuclear energy technologies be considered reversible?SQ2: Why should nuclear energy technologies be reversible?SQ3: If so, how could the reversibility of nuclear energy technologies be achieved?After the introductory chapter 1, the chapters that form the main body of this dissertation each provide a distinct contribution to answering the three subques-tions and, by extension, the main research question. Guided by three historical case studies of nuclear energy technology development (i.e., India, France and the USA), chapter 2 answers the first subquestion by formulating the two condi-tions under which it can be considered reversible, i.e., 1) the ability to stop the further development and deployment of a that technology in society, and 2) the ability to undo the undesirable outcomes (material, institutional or symbolic) of the development and deployment of the technology. Chapter 3 subsequently tackles