Department of Electrical Energy System Engineering, US-Pakistan Center for Advanced Studies in Energy (USPCAS-E), UET Peshawar, Pakistan

In this paper comparative analysis of maximum power point tracking techniques has been conducted to achieve highest magnitude of power from photovoltaic array. The algorithms proposed in this paper for extracting peak output from photovoltaic array are Perturb and Observe, Incremental Conductance, and Fuzzy Logic Control. There are some limitations with conventional converters i.e. Buck-Boost converter. When the operating voltage exceeds normal voltage as the voltage becomes high, the conventional converters fail to carry high voltage and current. Apart from this the ripple contents also increase abnormally due to the large impedance in the conventional converter. Similarly these converters cannot track maximum power point faster and effectively. In that case Single Ended Primary Inductor Converter (SEPIC) is the best choice instead of the conventional buck-boost converter, which is employed with the aim of extracting maximum output from the photovoltaic array. The aim of this study is to compare three MPPT techniques under varying environmental conditions with respect to maximum power extraction and speed of tracking time. SEPIC is used instead of conventional buck-boost converter in order to achieve maximum efficiency and less ripples. Also it can track maximum power point (MPP) faster than Buck-Boost Converter. Comparative analysis of three most extensively used MPPT techniques have been conducted in Simulink/Matlab.