Temperature fluctuations and moisture level in external walls. Case study Tirana, Albania

The incorporation of thermal insulation materials into building walls is a novel strategy for reducing heating and cooling energy consumption. Nowadays, the issues of energy production, consumption, and energy storage have become global problems. Furthermore, the thermal insulation of buildings increases the thermal comfort of residential premises in order to save energy. The use of several kinds of thermal insulation materials is required in the construction sector. This paper compares the thermal and moisture performance of two different types of walls. The buildings taken under consideration are located in two different Tirana neighborhoods, close to each other sharing similar climate parameters. Depending on the presence of thermal insulation, two types of walls were taken into consideration. A wall in which thermal insulation is not present and a wall with a ventilated façade system, are considered. Thermal insulation in the second case is made with rock mineral cotton. In order to obtain the most accurate results, pertinent temperature and humidity, measurements were made at several spots along the walls. The comparative analysis was performed using special measuring instruments. The temperature and moisture level in the internal walls and the temperatures of the external walls, at various spots on the walls, were taken into consideration, along with the layers of the relevant walls in both cases. The aim of this paper is to experimentally study the thermal performance of walls with various types of thermal insulation, including the ventilated façade system, as well as walls without thermal insulation. The purpose of the study is also to show how the technical and architectural methods utilized during construction affect the moisture and temperature fluctuations of the perimeter walls.