3d-printing

Documents about 3d-printing

• 3D Printing of Customizable Transient Bioelectronics and Sensors#308403Infoscience
• Development of 3D intestinal microphysiological systems using high-resolution 3D printing#142570HAL (France)
• USES AND IMPACT OF 3D PRINTING TECHNOLOGY#26370DataCite
• USES AND IMPACT OF 3D PRINTING TECHNOLOGY#26371DataCite
• 3D Printing of Dosage Form and Personalised Medicine in Pharmaceuticals#299637Zenodo (CERN)
• Clinical Evaluation of Three-Dimensional (3D) Printing Resin Nanoceramic Crown Restoration.#810316ClinicalTrials.gov
• 3D Printing Historical Wind Instruments for Musicians: Progress and Challenges#823190IRIS
• New paradigms with rheologically-complex materials: from protorheology to embedded 3d printing of bioinspired filaments#445688IDEALS @ University of Illinois Urbana-Champaign
• Gradient Multinozzle 3D Printing#259209bioRxiv / medRxiv
• Additive manufacturing (3D printing): A review of materials, methods, applications and challenges#7123OpenAlex
• Dynamic interface printing: An innovative acoustically-driven 3D printing technology.#4393NCBI PubMed Central
• Developing Custom High Resolution 3D Printers For Microfluidic Device Fabrication#332632BYU ScholarsArchive
• 3D printing of dense and anisotropic collagen/hyaluronan hydrogels for biofabrication of layered Annulus Fibrosus tissue#254069HAL (France)
• Wavelength-Dependent 3D Printing: Introducing 3D Printed Action Plots.#186018NCBI PubMed Central
• 3D printing in rheumatology#442530HAL (France)
• Development of high performance photoinitiating systems for 3D printing and coatings applications#156073HAL (France)
• 3D printing of alginate scaffolds for low-pH environments through slow alginic-acid hydrogel formation#294570HAL (France)
• Evaluating the impact of adopting 3d printing services on the retailers#641348Digital Commons @ NJIT
• Processing Parameter-Performance Nexus in 3D Printing of Nanostructured Chiral Photonics#372569Scholar Commons
• 3D Printing Technology For Planning Left Atrial Appendage Occlusion#870002ClinicalTrials.gov
• The Innovation of 3D Printing for Preoperative Planning in Hip Preservation Surgery#872555ClinicalTrials.gov
• On the use of magnetite nanoparticles as filler for 3D printing of polyether‐ether‐ketone‐based soft magnets#334337IRIS
• Low-cytotoxicity photoinitiators for sustainable 3D printing : Evaluating acylphosphine oxides and alternative type-I/type II systems#677232HAL (France)
• Playmaker 3D Printed Knee Extender#910600ClinicalTrials.gov
• Detection of bilirubin by stripping voltammetry at the gelled anisole – aqueous electrified interface supported with a 3D printed pore#218268HAL (France)
• The cell in the ink.improving biofabrication by printing stem cells for skeletal regenerative medicine#254402IRIS
• Review of Advances in 3D Printing Technology of Cementitious Materials: Key Printing Parameters and Properties Characterization#156191HAL (France)
• Development and characterization of composite filaments for 3D printing using rice husk and recycled polypropylene#446818Repositorio institucional Séneca
• Nanoenhanced additive manufacturing: Additive introduction onto halloysite nanotubes and into 3D printing filament for tailored material characteristics#957763Louisiana Tech Digital Commons
• 3D Printed Guide in Ankle Arthrodesis#991677ClinicalTrials.gov
• 3D model, gcode script, imaging, and electrochemical data for entirely 3D printed (PLA or PET-G) microelectrodes#448340Dane Badawcze UW Dataverse OAI Archive
• 3D & 4D Printing-In Engineering Applications.#12830NCBI PubMed Central
• CopyMe3D: Scanning and Printing Persons in 3D#275056Lund University Publications
• 3D Printing Didactic Skull Models for Student Learning#350901Iowa State University Digital Repository
• Don’t Repeat NY’s 3D Printing Blunder#367043Electronic Frontier Foundation
• NASA Pinhole Projector#1028210University of Virginia Dataverse Dataverse OAI Archive
• MULTI-MATERIAL 3D PRINTING OF STRETCHABLE ELECTRONICS VIA FILAMENTARY AND DROPLET-BASED DEPOSITION OF VISCOELASTIC INKS#347569Harvard DASH
• Evaluation of Composite Veneers Fabricated by 3D Printing and Milling Technologies#842575ClinicalTrials.gov
• A review on machine learning in 3D printing: applications, potential, and challenges#976549OpenAlex
• Novel photoredox catalysts used in multicomponent photoinitiating systems via electron transfer process for visible light and sunlight induced photopolymerization and application in 3D printing#308204HAL (France)
• Thermal conductivity of porous plastics manufactured by 3D printing: Controlling the design of the cavities and corresponding effects#940496Journal of Thermal Engineering
• Conventional Versus Digital 3D Printed Complete Removable Dentures#916992ClinicalTrials.gov
• Advances in 3D Printing for Personalized Pharmaceuticals#274132HAL (France)
• 3d print of the maxillary sinus for morphological study [Impresión 3D del seno maxilar para su estudio morfológico]#948844Repositorio de Universidad Autónoma de Chile.
• Development of a single porous material 3D-printed plantar orthosis to improve recycling and preserve the health of podiatrists#1000793HAL (France)
• 3D printing in core facilities – Low pain, high gain#206108ISTA Publications
• Self-evolving experimental platform for 3D sand printing.#402554NCBI PubMed Central
• 3D printing and robotics by size class of enterprise#817976Eurostat
• 3D printing and robotics by NACE Rev. 2 activity#817977Eurostat
• Prefabricated Versus 3D-Printing Myofunctional Appliances#913670ClinicalTrials.gov

Related topics