aerospace-engineering

Documents about aerospace-engineering

• Before Wall-Shear Collapse: Hybrid Internal States in APG Turbulent Boundary-Layer Separation#273693Figshare
• Program and Proceedings, The Nebraska Academy of Sciences 1880–2026: 146th Anniversary Year, One Hundred-Thirty-Sixth Annual Meeting#472031DigitalCommons@University of Nebraska
• Effects of Atomic Oxygen Exposure on Stressed Drag Sail Materials for Low Earth Orbit Applications#311355DigitalCommons@CalPoly
• The measurement of heat transfer and skin friction at supersonic speeds part 4 tests on a flat plate at M = 2.82#491492AERADE
• Report of the definitions panel on the definitions of the thrust of a jet engine and of the Internal Drag of a ducted body#491542AERADE
• A technique for the measurement of pressure distribution on oscillating aerofoils, with results for a rectangular wing of aspect ratio 3.3#491585AERADE
• Note on the effect of size and position of end plates on the lift of a rectangular wing in a wind tunnel#491657AERADE
• Design and Analysis of Energy Recovery Methods for Reduced Aircraft Emissions#179681Bucknell Digital Commons
• The interaction between shock waves and boundary layers with a note on the effects of the interaction on the performance of supersonic intakes#491532AERADE
• Some notes on the calculation of pressure pick-up sensitivity and the conditions for maximum sensitivity and the development of a miniature pressure pick-up#491551AERADE
• Investigation of high length/beam ratio seaplane hulls with high beam loadings hydrodynamic stability part 20 the effect of slipstream on stability and spray characteristics#491701AERADE
• Design of a Heated Twin Screw Auger Conveyor for Solvent Removal in a Solvent-Based Plastic Recycling System#623654Digital Commons @ Michigan Tech
• FMER: An Energy-Efficient Error Recovery Methodology for SRAM-Based FPGA Designs#190632UNSWorks Repository
• Comparative Analysis of Leaflet Materials, Stent Materials, and Stent Cell Density for Bileaflet Transcatheter Mitral Valve Design#387394Digital Commons @ Michigan Tech
• Developing a Method for Creating an Isaac Sim Simulation Model#208560Figshare
• Design, Fabrication, and Test of a Modular Fixed-Wing VTOL Drone Platform for Sperm Whale Tracking and Localization#387929Harvard DASH
• Designing to avoid dangerous behaviour of an aircraft due to the effects on control hinge moments of ice on the leading edge of the fixed surface#491418AERADE
• Investigation of high length/beam ratio seaplane hulls with high beam loadings hydrodynamic stability part 1 techniques and presentation of results of model tests#491553AERADE
• Investigation of high length/beam ratio seaplane hulls with high beam loadings hydrodynamic stability part 6 the effect of forebody warp on stability and spray characteristics#491555AERADE
• Investigation of high length/beam ratio seaplane hulls with high beam loadings hydrodynamic stability part 10 the effect of afterbody length on stability and spray characteristics#491556AERADE
• Wake survey and Straingauge measurements on an inclined propeller in the R.A.E. 24ft tunnel part 2 comparison of measured and calculated 1P stresses#491580AERADE
• Investigation of high length/beam ratio seaplane hulls with high beam loadings hydrodynamic stability Part 13 the effect of afterbody angle on stability and spray characteristics#491588AERADE
• Experimental correlation between the endurance of a wing spar joint and the ratio between 0.1 percent proof and ultimate tensile strengths of the material#491723AERADE
• Some results of an investigation into the use of air injection in a model of the diffuser for the A.R.A. supersonic tunnel#491738AERADE
• High reynolds number tests on a 70 degrees L.E. sweepback delta wing and body (H.P. 100) in the compressed air tunnel#491739AERADE
• Enhanced Polymer Classification via CNN Analysis of Wavelet-Transformed MIR Spectra: From 1D Signals to 2D Scalogram Representations#623664Digital Commons @ Michigan Tech
• Sanitizing manufacturing dataset labels using vision-language models#214956Digital Commons @ Michigan Tech
• Delivery of Medical Supplies to Remote Locations via Unmanned Aerial Vehicles: Approaches, Challenges, and Solutions#228063ODU Digital Commons
• Improving the Reliability and Performance of a Supersonic Indraft Tube Wind Tunnel#332998DigitalCommons@CalPoly
• Investigation of high length/beam ratio seaplane hulls with high beam loadings hydrodynamic stability Part 21 some notes on the effect of waves on longitudinal stability characteristics#491589AERADE
• NUMERICAL AND EXPERIMENTAL EVALUATION OF A SIMPLE, LOW-ENERGY LUNAR VOLATILE SEPARATION TECHNOLOGY#200235Digital Commons @ Michigan Tech
• Fractal antenna inspired EMP power grid mitigation device placement through cycle removal using graph theory#454240Digital Commons @ Michigan Tech
• CHARMEC 2022 Temperature data from tread braking tests#466990api.researchdata.se
• The measurement of heat transfer and skin friction at supersonic speeds: preliminary results of measurements on a flat plate at a mach number of 2.5#491411AERADE
• 3D Modeling of Pulse-Echo Ultrasonic Data and Drilling of Impact-Damaged Composite Laminates for Injection Repair#1038702eScholarship
• A spectral deferred correction strategy for low Mach number reacting flows subject to electric fields#784360eScholarship
• Experimental investigation of the log-law for an adverse pressure gradient turbulent boundary layer flow at Re up to 10000#356993electronic library
• The effect on weather minima of approach speed, cockpit cut-off angle and type of approach coupler for a given landing success rate and level of safety#491730AERADE
• Fibroporous design for tunable stiffness anisotropy in additively manufactured cellular structures#623662Digital Commons @ Michigan Tech
• Phase Change Cells and Verification of Gallium as Thermal Calibration Reference in Space#623747DigitalCommons@USU
• Maintenance management in shipping: the intricate interplay between organizations, technology, and humans#219881Springer Nature OA
• Influence of ribbed surfaces on condensation characteristics of air–water vapor mixture on vertical plate#460159Digital Commons @ Michigan Tech
• The measurement of heat transfer and skin friction at supersonic speeds part 2 boundary layer measurements on a flat plate at M = 2.5 and zero heat transfer#491416AERADE
• Towing tank tests to determine the water drag of the hull of a jet-propelled flying boat fighter (spec.E.6/44) and comparison with full scale measurements#491636AERADE
• The Governance of Unmanned Aircraft Systems (UAS): Aviation Law, Human Rights, and the Free Movement of Data in the EU#964603OpenAlex
• Pressure and boundary layer measurements on a 59 degrees sweptback wing at low speed and comparison with high speed results on a 45 degrees swept wing part 1 part 2#491438AERADE
• Nozzle Erosion Reconstruction Model for Data Analysis in Rocket Engines and Correlation With Chamber Pressure#814158DigitalCommons@USU
• Design and Development of MATLAB-based software for running a 3-point bending fatigue testing apparatus#208568Figshare
• <b>Nile-View 1: Advancing Earth Observation in Egypt via Cost-Efficient CubeSats</b>#339884Figshare
• A theoretical and experimental investigation of the flow in a duct of varying cross-section, with particular application to the design of ducts for free flight ground-launched model tests#491412AERADE