16 CFR Part 1219 — Safety Standard for Full-Size Baby Cribs

PART 1219—SAFETY STANDARD FOR FULL-SIZE BABY CRIBS Authority: 15 U.S.C. 2056a. Source: 75 FR 81786, Dec. 28, 2010, unless otherwise noted. § 1219.1 Scope, compliance dates, and definitions. (a) Scope. (b) Compliance dates. (2) Child care facilities, family child care homes, and places of public accommodation affecting commerce shall be required to comply with this part on December 28, 2012, but this provision applies only to the offer or provision for use of cribs by child care facilities, family child care homes, and places of public accommodation affecting commerce and not the sale, resale, or other placement in the stream of commerce of cribs by these entities. (c) Definitions. Full-size baby crib (i) Designed to provide sleeping accommodations for an infant; (ii) Intended for use in the home, in a child care facility, a family child care home, or place of public accommodation affecting commerce; and (iii) Within a range of ±5.1 cm (±2 in.) of the following interior dimensions: The interior dimensions shall be 71 ±1.6 cm (28 ± 5/8 3/8 5/8 (2) Place of public accommodation affecting commerce § 1219.2 Requirements for full-size baby cribs. Each full-size baby crib must comply with all applicable provisions of ASTM F1169-25, Standard Consumer Safety Specification for Full-Size Baby Cribs, https://www.astm.org/READINGLIBRARY/. fr.inspection@nara.gov, https://www.archives.gov/federal-register/cfr/ibr-locations.html. [84 FR 35296, July 23, 2019, as amended at 91 FR 23913, May 4, 2026]

Related documents

• 16 CFR Part 1241 — Safety Standard for Crib Mattresses#506173
• 16 CFR Part 1220 — Safety Standard for Non-Full-Size Baby Cribs#506153
• 16 CFR Part 1217 — Safety Standard for Toddler Beds#506150
• 16 CFR Part 1235 — Safety Standard for Baby Changing Products#506168
• 33 CFR Part 147 — Safety Zones#508791