2024-07-19+00:00 13:32:26+00:00 16 false false http://www.abo.fi ORG-0001 Åbo Akademi Domkyrkotorget 3 Turku 20500 FI1C1 FIN 0246312-1 Ronald Österbacka +358 504096423 [email protected] http://www.oikeus.fi/markkinaoikeus ORG-0002 Markkinaoikeus Radanrakentajantie 5 Helsinki 00520 FI1B1 FIN 3006157-6 +358 295643300 [email protected] http://hankintailmoitukset.fi ORG-0003 Hansel Oy (Hilma) Mannerheiminaukio 1a Helsinki 00100 FI1B1 FIN FI09880841 eSender 029 55 636 30 [email protected] 00440563-2024 142/2024 2024-07-23+02:00 2.3 eforms-sdk-1.10 ff9b9647-35df-4404-883c-1b91672eda09 4d23b6ee-22df-4243-a019-38a1debaf48e 2024-07-19+00:00 13:32:12+00:00 01 32014L0024 cn-standard ENG body-pl education ORG-0001 ted-esen ORG-0003 bankr-nat The economic operator is in any analogous situation like bankruptcy arising from a similar procedure under national laws and regulations. bankruptcy The economic operator is bankrupt. corruption The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for corruption, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable. cred-arran The economic operator is in arrangement with creditors. crime-org The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for participation in a criminal organisation, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable. distorsion The economic operator has entered into agreements with other economic operators aimed at distorting competition. envir-law The economic operator has breached its obligations in the field of environmental law. finan-laund The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for money laundering or terrorist financing, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable. fraud The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for fraud, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable. human-traffic The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for child labour and other forms of trafficking in human beings, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable. insolvency The economic operator is the subject of insolvency or winding-up. labour-law The economic operator has breached its obligations in the field of labour law. liq-admin The assets of the economic operator are being administered by a liquidator or by the court. misrepresent The economic operator can confirm that: a) It has been guilty of serious misrepresentation in supplying the information required for the verification of the absence of grounds for exclusion or the fulfilment of the selection criteria, b) It has withheld such information, c) It has not been able, without delay, to submit the supporting documents required by a contracting authority or contracting entity, and d) It has undertaken to unduly influence the decision making process of the contracting authority or contracting entity, to obtain confidential information that may confer upon it undue advantages in the procurement procedure or to negligently provide misleading information that may have a material influence on decisions concerning exclusion, selection or award. nati-ground Any person who is a member of the economic operator’s administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for work safety offence, working hours offence, work discrimination, extortionate work discrimination, violation of the right to organise or unauthorised use of foreign labour. partic-confl The economic operator is aware of any conflict of interest, as indicated in national law, the relevant notice or the procurement documents due to its participation in the procurement procedure. prep-confl The economic operator or an undertaking related to it has advised the contracting authority or contracting entity or otherwise been involved in the preparation of the procurement procedure. prof-misconduct The economic operator is guilty of grave professional misconduct. sanction The economic operator has experienced that a prior public contract, a prior contract with a contracting entity or a prior concession contract was terminated early, or that damages or other comparable sanctions were imposed in connection with that prior contract. socsec-law The economic operator has breached its obligations in the field of social law. socsec-pay The economic operator has breached its obligations relating to the payment social security contributions, both in the country in which it is established and in Member State of the contracting authority or contracting entity if other than the country of establishment. susp-act The business activities of the economic operator are suspended. tax-pay The economic operator has breached its obligations relating to the payment of taxes, both in the country in which it is established and in Member State of the contracting authority or contracting entity if other than the country of establishment. terr-offence The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for terrorist offences or offences linked to terrorist activities, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable. open false 519847 High-precision printing system The Tenderer is requested to submit a tender for a fully operational high-resolution printing system based on, but not restricted to, high-precision capillary printing, direct writing, high-resolution dispensing or other techniques capable of providing sub-micron resolution.
The main usage of the system is to manufacture
-high-resolution electrodes for miniaturizing organic-electronic devices such as organic electro-chemical transistors, electrolyte gated organic field-effect transistors, and other devices, -insulating layers with high precision and resolution for isolation of both electrodes and semiconductors in the electronic devices, -multi-layer structures, including organic semiconductors and dielectrics to complete the functional device structures, -photonic nanostructures using metallic, semiconductor, or dielectric inks to form periodically patterned surfaces that can guide or controllably scatter light of as short wavelength as possible (preferably in the visible range), as well as multi-material individual and clusters of pillars and lines with high aspect-ratio (height vs width) through multi-layer printing with different inks, -structured surfaces using inks based on polymeric and/or bio-materials for controlling the response of cells and bacteria towards various topographical, chemical and mechanical cues, -and conducting lines onto existing (mm-size) 3D scaffolds and soft-matter structures.
Furthermore, the users have high capability of producing new ink formulations using bio-based raw-materials (nanocellulose- or lignin-based). The system should have the capability to support the development and use novel ink formulations within given rheological and viscosity ranges. A protocol for how to implement and, test print properties and quality using own formulations need to be provided.
Usage environment and physical limitations
The instrument will be installed in the Aurum building by the Tender in Turku, Henriksgatan 3, FI-20500 Turku, within the laboratory of the Functional Printing Center of Åbo Akademi University (https://www.abo.fi/en/abo-akademi-functional-printing-center/), which is part of the Finnish Infrastructure for Printed Intelligence Research (https://www.oulu.fi/en/university/faculties-and-units/faculty-information-technology-and-electrical-engineering/optoelectronics-and-measurement-techniques/printed-intelligence-infrastructure).
For transport within the building the physical size of the instrument is limited to less than 95 x 210 x 229 cm (W x D x H) and a total weight below 1100 kg and less than 400 kg/m2. However, in operation the instrument must be placed close to a wall and the spatial footprint should not exceed 2x2 m2 of floor space, wherefore easy mobility for service access is required.
The power requirement must conform to 230 VAC, 50 Hz or three-phase 400 V/16 A. The laboratory will be equipped with a compressed air supply, maximum 6 bar pressure. The ambient temperature varies from 20°C to 25°C. Excluding maintenance breaks, the printing system should be ready for operation continuously, throughout the year. supplies The procurement process can be terminated for a justified reason at any stage before the final contract. The contracting authority is not responsible for the costs nor any possible damage caused to the Tenderer. No compensation will be payable to Tenderers for preparing a tender, presenting it or otherwise taking part in the procedure. 38000000 FI1C1 FIN LOT-0000 ef-stand n-used sui-act n-used tp-abil used no-eu-funds not-allowed Link to procurement documents non-restricted-document https://tarjouspalvelu.fi/aboakademi?id=519847&tpk=fb40c37d-cf4b-41f3-b272-bc9b003fa980 none allowed no allowed poi-exa 50 price Price More information in the call for tender. poi-exa 50 quality Quality More information in the call for tender. https://tarjouspalvelu.fi/aboakademi?id=519847&tpk=fb40c37d-cf4b-41f3-b272-bc9b003fa980 4 ORG-0002 ENG true true required true 2024-08-23+00:00 06:00:00+00:00 2024-08-12+00:00 06:00:00+00:00 2024-08-23+00:00 06:30:00+00:00 false none none 746300 High-precision printing system The Tenderer is requested to submit a tender for a fully operational high-resolution printing system based on, but not restricted to, high-precision capillary printing, direct writing, high-resolution dispensing or other techniques capable of providing sub-micron resolution.
The main usage of the system is to manufacture
-high-resolution electrodes for miniaturizing organic-electronic devices such as organic electro-chemical transistors, electrolyte gated organic field-effect transistors, and other devices, -insulating layers with high precision and resolution for isolation of both electrodes and semiconductors in the electronic devices, -multi-layer structures, including organic semiconductors and dielectrics to complete the functional device structures, -photonic nanostructures using metallic, semiconductor, or dielectric inks to form periodically patterned surfaces that can guide or controllably scatter light of as short wavelength as possible (preferably in the visible range), as well as multi-material individual and clusters of pillars and lines with high aspect-ratio (height vs width) through multi-layer printing with different inks, -structured surfaces using inks based on polymeric and/or bio-materials for controlling the response of cells and bacteria towards various topographical, chemical and mechanical cues, -and conducting lines onto existing (mm-size) 3D scaffolds and soft-matter structures.
Furthermore, the users have high capability of producing new ink formulations using bio-based raw-materials (nanocellulose- or lignin-based). The system should have the capability to support the development and use novel ink formulations within given rheological and viscosity ranges. A protocol for how to implement and, test print properties and quality using own formulations need to be provided.
Usage environment and physical limitations
The instrument will be installed in the Aurum building by the Tender in Turku, Henriksgatan 3, FI-20500 Turku, within the laboratory of the Functional Printing Center of Åbo Akademi University (https://www.abo.fi/en/abo-akademi-functional-printing-center/), which is part of the Finnish Infrastructure for Printed Intelligence Research (https://www.oulu.fi/en/university/faculties-and-units/faculty-information-technology-and-electrical-engineering/optoelectronics-and-measurement-techniques/printed-intelligence-infrastructure).
For transport within the building the physical size of the instrument is limited to less than 95 x 210 x 229 cm (W x D x H) and a total weight below 1100 kg and less than 400 kg/m2. However, in operation the instrument must be placed close to a wall and the spatial footprint should not exceed 2x2 m2 of floor space, wherefore easy mobility for service access is required.
The power requirement must conform to 230 VAC, 50 Hz or three-phase 400 V/16 A. The laboratory will be equipped with a compressed air supply, maximum 6 bar pressure. The ambient temperature varies from 20°C to 25°C. Excluding maintenance breaks, the printing system should be ready for operation continuously, throughout the year. supplies The procurement process can be terminated for a justified reason at any stage before the final contract. The contracting authority is not responsible for the costs nor any possible damage caused to the Tenderer. No compensation will be payable to Tenderers for preparing a tender, presenting it or otherwise taking part in the procedure. true hum-right work-cond 38000000 FI1C1 FIN UNLIMITED