mechanical-properties

Documents about mechanical-properties

• Influence of moisture content on the mechanical properties of selected wood-based composites#129363HAL (France)
• Microwave dielectric properties and low-temperature sintering of (1-x)BaTi4O9-xBaMoO4 composite ceramics#201287Universiti Putra Malaysia Institutional Repository
• Comparative Analysis of Physical and Mechanical Properties of Pellets Produced from Root and Stem Parts of Snack Pumpkin (Cucurbita pepo L.)#216623AVESIS
• Impacts of mixing techniques and vacuum levels on the structural and mechanical properties of PMMA bone cement: A comparative study.#227877NCBI PubMed Central
• Impact of Powder Characteristics on the Microstructure - Property Relationships of PBF-LB Metallic Alloys#250466HAL (France)
• Effect of heat treatment on the microstructure, mechanical properties and tribological behavior of Ti–45Nb alloy fabricated by laser powder bed fusion#273961HAL (France)
• Relation between microstructure and mechanical properties in old aluminum alloys, collected from WWII German airplanes#280402HAL (France)
• Physical and mechanical rock properties of Antuco volcano (Chile): insights into the renewed flank instability of a collapsed basaltic edifice#325975HAL (France)
• Extraordinary mechanical properties and room-temperature magnetocaloric effects in spark plasma sintered all-d-metal Ni-Co-Mn-Ti alloy#357457HAL (France)
• Assessment of morphology, radiopacity gradient and mechanical properties of articular cartilage with contrast-enhanced high-resolution peripheral quantitative computed tomography.#360618NCBI PubMed Central
• Modal properties of mechanical systems under geometric variations by perturbation theory#371001IRIS
• Study on the Mechanical Properties and Mesoscopic Damage Mechanisms of GGBFS-Modified Recycled Aggregate Concrete Based on Statistical Damage Theory.#409267NCBI PubMed Central
• Microstructure and Mechanical Properties of Aluminum Alloy Substrate Material Using Wire-Laser Directed Energy Deposition Assisted with Liquid Nitrogen Cooling.#409271NCBI PubMed Central
• Mechanical properties and microstructure of explosive- welded Al/Cu/Al sheet after equal channel angular rolling process in route A and C#441196Universiti Putra Malaysia Institutional Repository
• Fundamental Measurements in Economics and in the Theory of Consciousness (Manifestation of quantum-mechanical properties of economic objects in slit measurements)#773895PhilArchive
• On the Electronic, Mechanical and Optical Properties of Superhard Cross-Linked Carbon Nanotubes (Tubulanes)#974230arXiv (All)
• Analisis Pengaruh Variasi Arus Las TIG terhadap Karakteristik Mekanik Aluminium 6061#1066823Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
• Micromechanics model for three-dimensional open-cell foams using a tetrakaidecahedral unit cell and Castigliano's second theorem#343911Digital Commons @ Michigan Tech
• Evaluation of the Efficiency of a Biobased Reactive Plasticizer on the Morphology and Properties of Sustainable Flexible Films Based on Poly(Lactic Acid) (PLA) Produced by Blown Film Extrusion#456870IRIS
• Investigation of microstructure and mechanical properties of glass fiber reinforced 3D printed polymer composites#168935DigitalCommons@Kennesaw State University
• Haemostatic sponges as an alternative to granular bone substitute for sinus lifts#202611HAL (France)
• Circular HDF Manufacturing: Effects of Larch and Fir Fibre Ratios in Panels with Recycled Fibre Addition#206723RepOD Dataverse OAI Archive
• Tailoring the Microarchitecture and Mechanical Properties of Styrene-Hexyl Methacrylate PolyHIPEs via Microfluidic Emulsion Templating#236664RepOD Dataverse OAI Archive
• Achilles Tendon Mechanical but Not Morphological Properties Change with Rehabilitation in Patients with Chronic Midportion Achilles Tendinopathy#238943HAL (France)
• Mechanism of the influence of basalt fiber parameters on the mechanical properties and microstructure of high-volume red mud-cement paste.#242361NCBI PubMed Central
• Non-linearities in tensile behaviour of flax fibre bundles#322626HAL (France)
• Modification of a poly(propylene-co-ethylene) copolymer by incorporation of zeolites for membranes with improved mechanical properties and gas and water permeability#325983HAL (France)
• Experimental Study on Papercrete Bricks and Mortar from Recycling Paper#644253IRIS
• Based on interfacial strategy and topological design: simulation optimization of carbon nanomaterial reinforced PVA fibers#644963Materials Cloud Archive
• Effect of re-saturation after drying on hydric and strength behaviour of mortar#652824HAL (France)
• Atomic force microscopy to assess the mechanical properties of individual casein micelles#670103HAL (France)
• Dynamic Compression of Metal Syntactic Foam-Filled Aluminum Tubes#681770İzmir Yüksek Teknoloji Enstitüsü
• Relação entre o conteúdo de carga e propriedades mecânicas de seis resinas compostas microhíbridas#935345Repositório PUCRS
• Evaluation of mortars with combined use of fine recycled aggregates and waste crumb rubber#948808Repositorio de Universidad Autónoma de Chile.
• Acoustic Response of Fluid Adsorption and Transport in Nanoporous Materials#294632HAL (France)
• Investigation of the Physical, Mechanical and Chemical Properties of the Marrow of Raffia Hookeri#315063HAL (France)
• Tailoring Mechanical Properties and Ionic Conductivity of Poly(ionic liquid)-Based Ion Gels by Tuning Anion Compositions#412730OKAYAMA UNIVERSITY SCIENTIFIC ACHIEVEMENT REPOSITORY
• Moisture-uptake induced internal stresses in balsa core sandwich composite plate: Modeling and experimental#670170HAL (France)
• Mechanical properties, failure mechanisms, and scaling laws of bicontinuous nanoporous metallic glasses#679201OpenAlex
• Fire performance of heavyweight self-compacting concrete and heavyweight high strength concrete#680591Research Online
• Effects of Lumbar Spinal Manipulation in Subjects With Chronic Low Back Pain#836296ClinicalTrials.gov
• Automatic Generation of a Mechanical Properties Question-Answering Data Set for Language Model Benchmarking: A Comparative Study of BERT, XLNet, and LLaMA Models.#14941NCBI PubMed Central
• Experimental Design To Study The Effects Of Eggshell And Rice Husk Ash Content On Mechanical Properties Of Concrete#191469UMS ETD-db
• Predicting the uniaxial compressive strength and elasticity modulus of sandstones from physical and mechanical properties using statistical analyses and artificial intelligence-based techniques.#193561NCBI PubMed Central
• Lie Group and Lie Algebra Variational Integrators for Flexible Beam and Plate in R3#211154Infoscience
• Bio-assemblage actif incorporant la nisine, diffusion de cette bactériocine en gel d'agarose#330225HAL (France)
• Machine learning classification of normal and malignant cells on the basis of their viscoelastic properties#337588HAL (France)
• Development and characterization of flax/polypropylene based thermoplastic biocomposites with braiding technique : A multi-scale study#350635HAL (France)
• A disulfide-Fe3+ crosslinking strategy for tough hydrogel networks with complete photo- and biochemical degradability#425850S-Space: Seoul National University
• I-tac: inverse design of 3D-printed tactile elastomers with tunable optical and mechanical properties#462452Spiral